Laser phototypesetter outputs graphic information in the computer to film by laser scanning. It controls the intensity and scanning path of the laser beam to expose the photosensitive material on the film. After subsequent processing such as development, it forms a film that can be used for printing plate making.
Features
• High cost performance:
• This laser phototypesetter is relatively reasonably priced and can provide high-quality output that meets basic needs. It achieves a good balance between cost and performance, and is a good choice for users with limited budgets but who need high-quality printing plate making. For example, small printing shops can obtain typesetting equipment that can meet daily business at a lower cost.
• Darkroom operation:
• Due to the photosensitive characteristics of film, light may interfere with the film during the laser typesetting process, so it needs to be operated in a darkroom environment. Darkroom operation can ensure the accuracy of the film exposure process, avoid unnecessary light from exposing the film, and enable the output film to accurately reflect the graphic information in the computer.
• Easy maintenance:
• The equipment may be designed with a simple and easy-to-understand structure and easy-to-replace parts. For example, its internal optical system may be relatively easy to clean and calibrate, and the mechanical parts are also easy to disassemble and repair. For operators, after simple training, they can perform daily maintenance work, such as cleaning the lens and replacing consumables, reducing downtime and maintenance costs caused by equipment failure.
• LCD interface:
• The LCD interface makes operation more intuitive and convenient. Users can view the status parameters of the equipment, such as laser power, scanning speed, film remaining, etc., through the LCD screen. At the same time, various operation settings can be easily performed on the LCD interface, such as adjusting graphic layout parameters, selecting output resolution, etc., which greatly improves the convenience and efficiency of operation.
Most printing processes require printing plates, especially in the field of special printing, such as pad printing, screen printing, hot stamping, flexo printing, offset printing, and gravure printing. Some printing processes with higher technical barriers are developing towards computer direct platemaking technology (CTP), that is, using computer control to directly output the design draft stored in the computer to the printing plate to form a printing plate. Offset printing, flexo printing, and screen printing are relatively mature. Some printing processes with lower technical barriers still follow the traditional platemaking process. First, the image and text are output to the platemaking film, and then the platemaking film is used to cover the printing plate to make the printing plate. Pad printing, screen printing, and hot stamping still retain this process. The platemaking film becomes a film, which is formed by coating a photosensitive layer on a PET film. The transparent area of the platemaking film will transmit ultraviolet light, and the non-transparent area will block light. The photosensitive layer will solidify in the area that transmits ultraviolet light, and the photosensitive layer will not solidify in the area that does not transmit ultraviolet light, and will be washed away during development and washing.
Most pad printers, screen printers, and hot stamping machine operators are small-scale investors with meager profits, and may not be willing to buy expensive laser phototypesetters. However, the KC series laser phototypesetters are inexpensive, have moderate accuracy, and are easy to operate. They usually recover their costs in about three months. If you are engaged in pad printers, screen printers, and hot stamping machine processing business, or provide film output and plate making business for other printing factories, you can consider the KC brand laser phototypesetter.
Laser film imagine setter //Usage and characters
Guide
Laser image setter for film output, and small-format screen printing products, printing shop, printing proofing aspects of the ideal film output device,;
Darkroom operations, coupled with the traditional develop fixing technology, suitable printing proofing and small batch production tasks frequently produced films troubles;
Combined with a spin coating Machine, UV Exposure machine, drying box can independently set up a professional printing plate production center.
Pad Printing and screen printing industry due to the limitations of the lithographic process, the loss of original details and Halftone lost more obvious, and therefore cannot be too fine print restore. The KC serials laser imagines setter is the R & D for this feature.
The maximum number of screen lines to 175 lines. Therefore, Suitable for Pad printing, screen printing, Letterpress Printing, stickers, bronzing, medium accuracy of Gravure printing, the output of the ordinary precision offset PS plate making process in the film
Application fields
Film output during plate-making process of: pad printing, screen printing , Letterpress, Adhesive sticker printing, Bronzing, Middle-precision Grave printing, Middle-precision Offset Printing .Garment screen printing field.
Laser film imagine setter //Parameter
Technical parameters
PM-410FL
Max exports width: 410mm;
Output speed: 85mm/min;
Resolution ratio: 3000DPI;
Record source : Semiconductor Laser
Scan style: step;
Repetition accuracy: 0.01mm;
Film: Red laser phototypography film;
Joint : Parallel USB2.0;
Works style: semi-auto operation in darkness room;
Computer: ( P e n t i u m 4 2 G Hz Processor / 5 1 2 M R AM / 1 0 GB/,Mainboard US B 2 . 0/ 17” Monitor/ 3 2 MB VGA / X V GA/ CD R OM
Developing tray, Fixation tray.
Package list
Package Dimension: 1.10×0.75×1.30m;
Gross weight: 190Kg
CBM: 0.9071
H.S.Code
90065910
Certicate
CE
Laser imagine setter //Advantage
Function
Semiconductor luminescence lamp-house;
Flat operation mode;
Expert image controlling technology;
Film store box aggregated storing, measuring, cutting, feeding function installed
RIP 3.0 sent with machine, used both PC AND MAC system;
Design for pad film output.
The roll film feeding , suitable for the negative of the output of any length and Positive Film.
Application︰
Traditional printing technology requires plate making, and plate making also mostly requires printing negatives to distinguish between printed and non-printed areas. The task of making plate negatives is mainly done by the film output machine. The manuscripts designed by design software such as Coreldraw or photoshop are rasterized by RIP, recorded on the film by the laser head of the film output machine to form graphic and non-graphic areas, and then developed and fixed to form the printing plate. Printing negatives is a key element in making high-quality printing plates. In the field of special printing, such as pad printing, silk screen printing, hot stamping, etc., where precision is not required, the requirements for exposure film are: The format is not large, the quantity is not high, and the requirements are not strict, then the use of high-end laser imagesetters is a big deal. Therefore, film output machines specially designed and produced for these printing market segments came into being.
