Printing Machine
Home
News
Solution
Contact
Foil stamping
Pad Printing
InterNet Shop
screen printing

News 

News

Pre-treatment device for pen-rod screen printer

Publish Date 2016-07-02
Most use a plastic pen cheap PP material, in the case of adhesion to the less demanding, using a dedicated PP silk screen printing ink, can not use pre-press, but there are stringent requirements for adhesion with some users, then in the pen screen printing machine above the installation of the necessary pre-press processing equipment it is very important.
    Currently, all three mature prepress processing means are adopted: flame treatment, high-frequency processing, PP water wiping device.
    Pen smaller diameter, the process requires a 360-degree rotation, which increases the complexity of the mechanical structure. From the point of view, the ideal high-frequency processing, PP water wipe Secondly, flame treatment after home.
    Pen screen printing machine prepress device, effectively solves some pen surface residual stains and grunge ink resistance, increased adhesion.


Pre-treatment device for pen-rod screen printer
Pre-treatment device for pen-rod screen printer
Pre-treatment device for pen-rod screen printer
Pre-treatment device for pen-rod screen printer

Printing Machine  |  Home  |  News  |  Solution  |  Contact  |  Foil stamping  |  Pad Printing  |  InterNet Shop  |  screen printing  |  Sitemap  |  Mobile Version
  English     简体版     繁體版
Powered by DIYTrade.com
HomeContact UsSitemap