The hot stamping of roll materials usually needs to carry out continuous hot stamping on the whole roll according to a certain pitch. This kind of hot stamping machine is much more complicated than the hot stamping machine conveyed by single paper. The most important thing to solve the hot stamping of roll materials is Conveying and positioning problems of roll material. For the roll material without any printing, the adjustment of the conveying length of the roll material, the axial and radial positioning, and the control of the surface tension are all problems that need to be solved. It has already been solved on the machine, and it is enough to transfer these technologies to the hot stamping machine. In addition, for the printed roll materials, it is very important to ensure that the hot stamping position and the printing position are relatively fixed. This is the photoelectric control technology, photoelectric The switch can identify the printing color, and control the servo motor to drive the package material to the designated position for bronzing.
The hot stamping machine for roll materials integrates various technologies such as automatic hot stamping technology, deviation correction technology, tension control technology, and infrared tracking technology. It represents the highest level of hot stamping technology and occupies an unattainable position in the field of plastic and paper packaging.
H-TC1000KTD Full automatically film hot stamping Machine //Structure
|
Feeding
|
Automatically
|
Initial position
|
Sensor control .
|
Working table
|
Transport working table
|
Transport controlling
|
Tension adustment device; automatically Position correcting set
|
Drawing identification
|
Sensor and service motor controlling
|
Press
|
Vertical press
|
Temperature control
|
Heating tube Heater, automatically controlling
|
Foil collecting
|
Automatically collecting
|
Blanking
|
Automatically
|
H-TC1000KTD Full automatically Film hot stamping machine //Usage and characters
|
Guide
|
- This is a specific roll materials, such as films, web, stickers and design of automatic flat hot stamping machine;
- Suitable for all kinds of roll material surface bronzing certain pitch;
- Roll material surface bronzing, two cases, one is not printed materials, this relatively simple form gilt; another one is already printed materials, this form requires precision photoelectric bronzing recognition.
- Stable lateral movement by inverter motor control, stamping pressure evenly, good stamping quality;
- Programmable logic controller precisely adjust various parameters, a good user interface;
- Set up a single machine debugging function operation, you can set up a fully functional operation.
|
Application fields
|
- Unprinted roll surface bronzing various materials;
- A variety of printed materials gilt rolls;
- Suitable adhesive industry, plastic packaging industry, the composite film packaging industry.
|
H-TC1000KTD Full automatically film hot stamping Machine //Parameter
|
Technical parameters
|
- Maximum stamping width: 1000 MM;
- Maximum stamping area: 200 × 200MM;
- Table size: 900mm × 500mm;
- Maximum printing speed: 30-120pcs / min;
- Transfer time range: 0-99 seconds;
- Reeling foil time range: 0-99 seconds;
- Stamping head down stroke: 60mm;
- Maximum stamping pressure: 1000kg;
- Heat Wattage: 4 * 500w = 2000w;
- Power supply: 3 phase 380V;
- Drive motor power: 1000W.
|
Works supply
|
- 3Phase 380V Power supply;
- 5-7Bar Compress air;
|
Package list
|
- Package size: 4750×1750×1600MM;
- Gross weight: 4263kg
- CBM: 13.715896
|
H.S.Code
|
8443198000
|
Certificate
|
CE
|
H-TC1000KTD Full automatically Film hot stamping machine //Advantage
|
Function
|
- Microcomputer control, touch screen operating system;
- Four Figure counter build in, high degree of automation;
- High-precision tension control mechanism, film conveying smooth, uniform tension;
- Stamping head position can be flexibly adjusted to any position in the film stamping;
- Automatic temperature control system, precise and accurate temperature control;
- Transfer time, Collecting time, temperature control to adjust the settings have been several significant ways;
- High-precision electric Sensor control device, precise control of stamping pitch;
- Stepless speed adjustment, stable and reliable machine operation speed;
- Automatic alignment device, receives the paper part of the automatic collection;
- High-precision stainless steel coil roll, stable and lasting life;
- Rolls for products such as roll, roll film, the continuous self-adhesive label gilt.
|
|
|
|
|
Application︰ | Hot stamping on roll materials is also a process often encountered in the packaging industry. Hot stamping on plastic film is more difficult because the film is very soft, easy to stretch, and difficult to position. After a long period of exploration, a brand-new hot stamping machine for roll film materials came out, which can stamp all materials such as PVC, PET, PP, PC, etc. with a width of 1M. The machine is equipped with an automatic tension system, an automatic correction system, and an automatic photoelectric tracking and alignment system, which is another weapon in the packaging industry. |
|
|
Product Image
|